THB
- THB
- USD
- EUR
- GBP
FREE SHIPPING in Thailand for orders over THB2,000!
Trifocal hydrophilic IOL (Micro F) and (POD F)
Technical specifications
INJECTION GUIDELINES
The Medicel Viscoject Bio 1.8 / 2.2 and Accuject 1.8 / 2.0 / 2.1 / 2.2 injection systems are recommended for implanting the FineVision lenses.
These fully single-use systems represent total reliability for safe and effective lens injections.
Their compact design with integrated cartridge enables a simple, predictable loading and positioning of the lens.
FineVision Micro F:
Medicel Viscoject Bio 1.8 / 2.2 & Accuject 1.8 / 2.0 / 2.1 / 2.2
Guidelines with Viscoject:
1. Apply viscoelastic into the tip and the loading chamber of
the injector cartridge.
2. Remove the lens from the lens holder. Position the lens
into the cartridge in such way that the two haptics with the
notches are pointing at 1 and 7 o’clock.
3. Exert slight pressure onto the lens optic and make sure that
all haptics are inside before further closing the cartridge.
4. Close the cartridge and check the position of the lens.
Once the "click-lock" mechanism engages, the lens is
securely loaded.
5. Engage the cartridge in the injector.
6. Press the injector plunger forward and push the lens into
the conical tip of the cartridge. Pull the plunger back a
few millimeters and then inject the lens in one continuous
motion. For gently implantation, it is not necessary to push
the plunger until the end of the cartridge.
FineVision Pod F:
Accuject 2.0 for lens diopters < 25D & Accuject 2.1 / 2.2 for lens diopters ≥ 25D
Guidelines with Accuject:
1. Apply viscoelastic into the tip and the loading chamber of
the injector cartridge.
2. Remove the lens from the lens holder. Position the lens
into the cartridge in such way that the two haptics with the
holes are pointing at 1 and 7 o’clock.
3. Exert slight pressure onto the lens optic and make sure that
all haptics are inside before further closing the cartridge.
Close the cartridge and check the position of the lens.
4. Once the "click-lock" mechanism engages, the lens is
securely loaded and ready for injection.
5. Press the injector plunger forward and push the lens into
the conical tip of the cartridge.
6. Pull the plunger back a few millimeters and then inject the
lens in one continuous motion. For gently implantation, it
is not necessary to push the plunger until the end of the
cartridge
INJECTION GUIDELINES
The Medicel Viscoject Bio 1.8 / 2.2 and Accuject 1.8 / 2.0 / 2.1 / 2.2 injection systems are recommended for implanting the FineVision lenses.
These fully single-use systems represent total reliability for safe and effective lens injections.
Their compact design with integrated cartridge enables a simple, predictable loading and positioning of the lens.
FineVision Micro F:
Medicel Viscoject Bio 1.8 / 2.2 & Accuject 1.8 / 2.0 / 2.1 / 2.2
Guidelines with Viscoject:
1. Apply viscoelastic into the tip and the loading chamber of
the injector cartridge.
2. Remove the lens from the lens holder. Position the lens
into the cartridge in such way that the two haptics with the
notches are pointing at 1 and 7 o’clock.
3. Exert slight pressure onto the lens optic and make sure that
all haptics are inside before further closing the cartridge.
4. Close the cartridge and check the position of the lens.
Once the "click-lock" mechanism engages, the lens is
securely loaded.
5. Engage the cartridge in the injector.
6. Press the injector plunger forward and push the lens into
the conical tip of the cartridge. Pull the plunger back a
few millimeters and then inject the lens in one continuous
motion. For gently implantation, it is not necessary to push
the plunger until the end of the cartridge.
FineVision Pod F:
Accuject 2.0 for lens diopters < 25D & Accuject 2.1 / 2.2 for lens diopters ≥ 25D
Guidelines with Accuject:
1. Apply viscoelastic into the tip and the loading chamber of
the injector cartridge.
2. Remove the lens from the lens holder. Position the lens
into the cartridge in such way that the two haptics with the
holes are pointing at 1 and 7 o’clock.
3. Exert slight pressure onto the lens optic and make sure that
all haptics are inside before further closing the cartridge.
Close the cartridge and check the position of the lens.
4. Once the "click-lock" mechanism engages, the lens is
securely loaded and ready for injection.
5. Press the injector plunger forward and push the lens into
the conical tip of the cartridge.
6. Pull the plunger back a few millimeters and then inject the
lens in one continuous motion. For gently implantation, it
is not necessary to push the plunger until the end of the
cartridge